Product Information
When the X1-CRT RTR was designed, Hong Nor wanted an RTR that can be taken straight out of the box, to the track, and win without any mods needed. The X1-CRT RTR has all the features to take it to a higher level than other RTR truggy's. Threaded shocks, anti roll bars, Futaba radio gear, Force .32 engine and more!
If you are looking to get into racing 1/8th truggy's or want a fast, agile truck for bashing then look no further than the CRT. This is the best value truck on the market and the number one truggy used in the UK and USA.
Features:
• HN/Futaba radio system
• Futaba 3305 High torque steering servo (9.0 KG)
• Front and rear adjustable anti roll bars
• HN Force high output .32 engine
• Lightened and hardened front universal joints made from high grade steel alloy
• New design hard anodized 13mm big bore threaded shocks for quick adjustments
• Large 150cc Fuel Tank lower and closer to center of the chassis
• Precision machined hardened steel main gear and clutch bell
• Lower CG components provide faster response and greater stability
• Aluminium front spindles with Patented T-Bolt design. (No more gluing required.)
• New design longer front and rear suspension arms with increased up-travel makes the car handle better
• Front lay-down steering servo for lower CG
• Aluminium 4mm thick front and rear shock towers
• Servo saver connecting plate
• Steering servo saver also mounted closer together to reduce bump steer
• Front-kick up angle adjustable from 20 to 22 degrees
• 2.5 degree 4mm rear anti-squat plate
• Front and rear camber adjustment using strong steel turnbuckles
• Front and Rear camber can be fine tuned to suit your track conditions
• Engine mounted lower and closer to the center of the chassis
• Smooth anodised chassis with countersunk hex screw
• Complete set of 8mm x 16mm precision rubber sealed bearing for long life
• High flow 2 stage air filter for maximum engine protection and increased engine performance
• New front and rear anti-fade 3mm thick glass fiber brake discs
• Independent front and rear brake adjusters
• Aluminium radio tray, front top plate and center differential brake mount
• Plastic front and rear chassis stiffeners
• Receiver and battery pack box mounted lower for a lower CG
• Secure transponder mount system
• All aluminium parts are anodized
• New design light-weight HN dish wheels with 17mm hex
• Pre-mounted brick pin tyres on dish wheels.(Traxxax Size)
• Drive gear ratio is optimized for .21 and .28 size race engines
• High quality polished 3 chamber exhaust pipe tuned for maximum performanc
Wow, some spec!
Tech Spec:
• Length: 535mm
• Height: 190mm
• Width: 443mm
• Wheelbase: 370mm
• Total Weight: 4300g
• Gear Ratio: 15.77:1
• G/Clearance: 70mm
• Tyre Size: 135mm x 84mm
• Engine: 21~28 Class
Required to run:
• Fuel (25%)
• Fuel Bottle
• 12x AA Batteries
• Glow Starter & Charger
• Glow Plug (HPI R5)
• Tyre Glue (Tyres supplied unmounted)
Models 
